matthias/es-praktikum
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
es-praktikum/Milestone6/Zybo-Z7-20_VideoOut.tcl
T
Matthias Biermann 0b3bea8b52 M6: Hinzufügen Praktikumsunterlagen
2024-12-09 14:48:49 +01:00

1045 lines
45 KiB
Tcl
Raw Permalink Blame History

################################################################
# This is a generated script based on design: design_1
#
# Though there are limitations about the generated script,
# the main purpose of this utility is to make learning
# IP Integrator Tcl commands easier.
################################################################
namespace eval _tcl {
proc get_script_folder {} {
set script_path [file normalize [info script]]
set script_folder [file dirname $script_path]
return $script_folder
}
}
variable script_folder
set script_folder [_tcl::get_script_folder]
################################################################
# Check if script is running in correct Vivado version.
################################################################
set scripts_vivado_version 2023.1
set current_vivado_version [version -short]
if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
puts ""
catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
return 1
}
################################################################
# START
################################################################
# To test this script, run the following commands from Vivado Tcl console:
# source design_1_script.tcl
# If there is no project opened, this script will create a
# project, but make sure you do not have an existing project
# <./myproj/project_1.xpr> in the current working folder.
set list_projs [get_projects -quiet]
if { $list_projs eq "" } {
create_project project_1 myproj -part xc7z020clg400-1
set_property BOARD_PART digilentinc.com:zybo-z7-20:part0:1.0 [current_project]
}
# CHANGE DESIGN NAME HERE
variable design_name
set design_name design_1
# If you do not already have an existing IP Integrator design open,
# you can create a design using the following command:
# create_bd_design $design_name
# Creating design if needed
set errMsg ""
set nRet 0
set cur_design [current_bd_design -quiet]
set list_cells [get_bd_cells -quiet]
if { ${design_name} eq "" } {
# USE CASES:
# 1) Design_name not set
set errMsg "Please set the variable <design_name> to a non-empty value."
set nRet 1
} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
# USE CASES:
# 2): Current design opened AND is empty AND names same.
# 3): Current design opened AND is empty AND names diff; design_name NOT in project.
# 4): Current design opened AND is empty AND names diff; design_name exists in project.
if { $cur_design ne $design_name } {
common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
set design_name [get_property NAME $cur_design]
}
common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
# USE CASES:
# 5) Current design opened AND has components AND same names.
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
set nRet 1
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
# USE CASES:
# 6) Current opened design, has components, but diff names, design_name exists in project.
# 7) No opened design, design_name exists in project.
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
set nRet 2
} else {
# USE CASES:
# 8) No opened design, design_name not in project.
# 9) Current opened design, has components, but diff names, design_name not in project.
common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
create_bd_design $design_name
common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
current_bd_design $design_name
}
common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
if { $nRet != 0 } {
catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
return $nRet
}
set bCheckIPsPassed 1
##################################################################
# CHECK IPs
##################################################################
set bCheckIPs 1
if { $bCheckIPs == 1 } {
set list_check_ips "\
xilinx.com:ip:processing_system7:5.5\
xilinx.com:ip:proc_sys_reset:5.0\
xilinx.com:ip:xlconcat:2.1\
xilinx.com:ip:xlconstant:1.1\
xilinx.com:user:zynq_base_hdmi:1.0\
"
set list_ips_missing ""
common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
foreach ip_vlnv $list_check_ips {
set ip_obj [get_ipdefs -all $ip_vlnv]
if { $ip_obj eq "" } {
lappend list_ips_missing $ip_vlnv
}
}
if { $list_ips_missing ne "" } {
catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
set bCheckIPsPassed 0
}
}
if { $bCheckIPsPassed != 1 } {
common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
return 3
}
##################################################################
# DESIGN PROCs
##################################################################
# Hierarchical cell: ZYNQ_BASE
proc create_hier_cell_ZYNQ_BASE { parentCell nameHier } {
variable script_folder
if { $parentCell eq "" || $nameHier eq "" } {
catch {common::send_msg_id "BD_TCL-102" "ERROR" "create_hier_cell_ZYNQ_BASE() - Empty argument(s)!"}
return
}
# Get object for parentCell
set parentObj [get_bd_cells $parentCell]
if { $parentObj == "" } {
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
return
}
# Make sure parentObj is hier blk
set parentType [get_property TYPE $parentObj]
if { $parentType ne "hier" } {
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
return
}
# Save current instance; Restore later
set oldCurInst [current_bd_instance .]
# Set parent object as current
current_bd_instance $parentObj
# Create cell and set as current instance
set hier_obj [create_bd_cell -type hier $nameHier]
current_bd_instance $hier_obj
# Create interface pins
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M_AXI
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S_AXIL
# Create pins
create_bd_pin -dir I -from 3 -to 0 BUTTON_0
create_bd_pin -dir O HDMI_CLK_N_0
create_bd_pin -dir O HDMI_CLK_P_0
create_bd_pin -dir O -from 2 -to 0 HDMI_DATA_N_0
create_bd_pin -dir O -from 2 -to 0 HDMI_DATA_P_0
create_bd_pin -dir O -from 3 -to 0 LED_0
create_bd_pin -dir I -type clk M_AXI_ACLK
create_bd_pin -dir I -type rst M_AXI_ARESETN
create_bd_pin -dir O -from 5 -to 0 RGB_LED_0
create_bd_pin -dir I -from 3 -to 0 SWITCH_0
create_bd_pin -dir I VIDEO_CLK
create_bd_pin -dir O VIDEO_INTERRUPT
# Create instance: zynq_base_hdmi_0, and set properties
set zynq_base_hdmi_0 [ create_bd_cell -type ip -vlnv xilinx.com:user:zynq_base_hdmi:1.0 zynq_base_hdmi_0 ]
set_property -dict [ list \
CONFIG.FIFO_AWIDTH {12} \
CONFIG.HAS_HDMI {true} \
CONFIG.HAS_VGA_OUTPUTS {false} \
] $zynq_base_hdmi_0
# Create interface connections
connect_bd_intf_net -intf_net ps7_0_axi_periph_M00_AXI [get_bd_intf_pins S_AXIL] [get_bd_intf_pins zynq_base_hdmi_0/S_AXIL]
connect_bd_intf_net -intf_net zynq_base_hdmi_0_M_AXI [get_bd_intf_pins M_AXI] [get_bd_intf_pins zynq_base_hdmi_0/M_AXI]
# Create port connections
connect_bd_net -net BUTTON_0_1 [get_bd_pins BUTTON_0] [get_bd_pins zynq_base_hdmi_0/BUTTON]
connect_bd_net -net SWITCH_0_1 [get_bd_pins SWITCH_0] [get_bd_pins zynq_base_hdmi_0/SWITCH]
connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins M_AXI_ACLK] [get_bd_pins zynq_base_hdmi_0/M_AXI_ACLK] [get_bd_pins zynq_base_hdmi_0/S_AXIL_ACLK]
connect_bd_net -net processing_system7_0_FCLK_CLK3 [get_bd_pins VIDEO_CLK] [get_bd_pins zynq_base_hdmi_0/VIDEO_CLK]
connect_bd_net -net rst_ps7_0_100M_peripheral_aresetn [get_bd_pins M_AXI_ARESETN] [get_bd_pins zynq_base_hdmi_0/M_AXI_ARESETN] [get_bd_pins zynq_base_hdmi_0/S_AXIL_ARESETN] [get_bd_pins zynq_base_hdmi_0/VIDEO_RESETN]
connect_bd_net -net zynq_base_hdmi_0_HDMI_CLK_N [get_bd_pins HDMI_CLK_N_0] [get_bd_pins zynq_base_hdmi_0/HDMI_CLK_N]
connect_bd_net -net zynq_base_hdmi_0_HDMI_CLK_P [get_bd_pins HDMI_CLK_P_0] [get_bd_pins zynq_base_hdmi_0/HDMI_CLK_P]
connect_bd_net -net zynq_base_hdmi_0_HDMI_DATA_N [get_bd_pins HDMI_DATA_N_0] [get_bd_pins zynq_base_hdmi_0/HDMI_DATA_N]
connect_bd_net -net zynq_base_hdmi_0_HDMI_DATA_P [get_bd_pins HDMI_DATA_P_0] [get_bd_pins zynq_base_hdmi_0/HDMI_DATA_P]
connect_bd_net -net zynq_base_hdmi_0_LED [get_bd_pins LED_0] [get_bd_pins zynq_base_hdmi_0/LED]
connect_bd_net -net zynq_base_hdmi_0_RGB_LED [get_bd_pins RGB_LED_0] [get_bd_pins zynq_base_hdmi_0/RGB_LED]
connect_bd_net -net zynq_base_hdmi_0_VIDEO_INTERRUPT [get_bd_pins VIDEO_INTERRUPT] [get_bd_pins zynq_base_hdmi_0/VIDEO_INTERRUPT]
# Restore current instance
current_bd_instance $oldCurInst
}
# Hierarchical cell: PS
proc create_hier_cell_PS { parentCell nameHier } {
variable script_folder
if { $parentCell eq "" || $nameHier eq "" } {
catch {common::send_msg_id "BD_TCL-102" "ERROR" "create_hier_cell_PS() - Empty argument(s)!"}
return
}
# Get object for parentCell
set parentObj [get_bd_cells $parentCell]
if { $parentObj == "" } {
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
return
}
# Make sure parentObj is hier blk
set parentType [get_property TYPE $parentObj]
if { $parentType ne "hier" } {
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
return
}
# Save current instance; Restore later
set oldCurInst [current_bd_instance .]
# Set parent object as current
current_bd_instance $parentObj
# Create cell and set as current instance
set hier_obj [create_bd_cell -type hier $nameHier]
current_bd_instance $hier_obj
# Create interface pins
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR
create_bd_intf_pin -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M_AXI_GP0
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S_AXI_HP0
# Create pins
create_bd_pin -dir O -type clk FCLK_CLK0
create_bd_pin -dir O -type clk FCLK_CLK3
create_bd_pin -dir I -from 0 -to 0 In0
create_bd_pin -dir O -from 0 -to 0 -type rst peripheral_aresetn
# Create instance: processing_system7_0, and set properties
set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]
set_property -dict [ list \
CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {666.666687} \
CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.158730} \
CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {125.000000} \
CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {100.000000} \
CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {125.000000} \
CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {66.666672} \
CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {50.000000} \
CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_APU_CLK_RATIO_ENABLE {6:2:1} \
CONFIG.PCW_APU_PERIPHERAL_FREQMHZ {667} \
CONFIG.PCW_ARMPLL_CTRL_FBDIV {40} \
CONFIG.PCW_CAN0_CAN0_IO {<Select>} \
CONFIG.PCW_CAN0_GRP_CLK_ENABLE {0} \
CONFIG.PCW_CAN0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_CAN_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_CAN_PERIPHERAL_VALID {0} \
CONFIG.PCW_CLK0_FREQ {100000000} \
CONFIG.PCW_CLK1_FREQ {125000000} \
CONFIG.PCW_CLK2_FREQ {200000000} \
CONFIG.PCW_CLK3_FREQ {66666672} \
CONFIG.PCW_CPU_CPU_6X4X_MAX_RANGE {667} \
CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1333.333} \
CONFIG.PCW_CPU_PERIPHERAL_CLKSRC {ARM PLL} \
CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
CONFIG.PCW_CRYSTAL_PERIPHERAL_FREQMHZ {33.333333} \
CONFIG.PCW_DCI_PERIPHERAL_CLKSRC {DDR PLL} \
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {15} \
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {7} \
CONFIG.PCW_DCI_PERIPHERAL_FREQMHZ {10.159} \
CONFIG.PCW_DDRPLL_CTRL_FBDIV {32} \
CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1066.667} \
CONFIG.PCW_DDR_HPRLPR_QUEUE_PARTITION {HPR(0)/LPR(32)} \
CONFIG.PCW_DDR_HPR_TO_CRITICAL_PRIORITY_LEVEL {15} \
CONFIG.PCW_DDR_LPR_TO_CRITICAL_PRIORITY_LEVEL {2} \
CONFIG.PCW_DDR_PERIPHERAL_CLKSRC {DDR PLL} \
CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {2} \
CONFIG.PCW_DDR_PORT0_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT1_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT2_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT3_HPR_ENABLE {0} \
CONFIG.PCW_DDR_RAM_HIGHADDR {0x3FFFFFFF} \
CONFIG.PCW_DDR_WRITE_TO_CRITICAL_PRIORITY_LEVEL {2} \
CONFIG.PCW_ENET0_ENET0_IO {MIO 16 .. 27} \
CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {1} \
CONFIG.PCW_ENET0_GRP_MDIO_IO {MIO 52 .. 53} \
CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {8} \
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
CONFIG.PCW_ENET0_RESET_ENABLE {0} \
CONFIG.PCW_ENET1_GRP_MDIO_ENABLE {0} \
CONFIG.PCW_ENET1_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {1000 Mbps} \
CONFIG.PCW_ENET1_RESET_ENABLE {0} \
CONFIG.PCW_ENET_RESET_ENABLE {1} \
CONFIG.PCW_ENET_RESET_POLARITY {Active Low} \
CONFIG.PCW_ENET_RESET_SELECT {Share reset pin} \
CONFIG.PCW_EN_4K_TIMER {0} \
CONFIG.PCW_EN_CAN0 {0} \
CONFIG.PCW_EN_CLK1_PORT {1} \
CONFIG.PCW_EN_CLK2_PORT {1} \
CONFIG.PCW_EN_CLK3_PORT {1} \
CONFIG.PCW_EN_EMIO_CAN0 {0} \
CONFIG.PCW_EN_EMIO_I2C0 {0} \
CONFIG.PCW_EN_EMIO_I2C1 {0} \
CONFIG.PCW_EN_EMIO_SPI0 {0} \
CONFIG.PCW_EN_EMIO_SPI1 {0} \
CONFIG.PCW_EN_EMIO_TTC0 {1} \
CONFIG.PCW_EN_EMIO_UART0 {0} \
CONFIG.PCW_EN_EMIO_WP_SDIO0 {1} \
CONFIG.PCW_EN_ENET0 {1} \
CONFIG.PCW_EN_GPIO {1} \
CONFIG.PCW_EN_I2C0 {1} \
CONFIG.PCW_EN_I2C1 {1} \
CONFIG.PCW_EN_QSPI {1} \
CONFIG.PCW_EN_SDIO0 {1} \
CONFIG.PCW_EN_SPI0 {0} \
CONFIG.PCW_EN_SPI1 {0} \
CONFIG.PCW_EN_TTC0 {1} \
CONFIG.PCW_EN_UART0 {1} \
CONFIG.PCW_EN_UART1 {1} \
CONFIG.PCW_EN_USB0 {1} \
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {2} \
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {4} \
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {2} \
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {15} \
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_FCLK_CLK1_BUF {TRUE} \
CONFIG.PCW_FCLK_CLK2_BUF {TRUE} \
CONFIG.PCW_FCLK_CLK3_BUF {TRUE} \
CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_FPGA1_PERIPHERAL_FREQMHZ {125} \
CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_FPGA3_PERIPHERAL_FREQMHZ {65} \
CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
CONFIG.PCW_FPGA_FCLK1_ENABLE {1} \
CONFIG.PCW_FPGA_FCLK2_ENABLE {1} \
CONFIG.PCW_FPGA_FCLK3_ENABLE {1} \
CONFIG.PCW_GPIO_MIO_GPIO_ENABLE {1} \
CONFIG.PCW_GPIO_MIO_GPIO_IO {MIO} \
CONFIG.PCW_GPIO_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_I2C0_GRP_INT_ENABLE {0} \
CONFIG.PCW_I2C0_I2C0_IO {MIO 14 .. 15} \
CONFIG.PCW_I2C0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_I2C0_RESET_ENABLE {0} \
CONFIG.PCW_I2C1_GRP_INT_ENABLE {0} \
CONFIG.PCW_I2C1_I2C1_IO {MIO 12 .. 13} \
CONFIG.PCW_I2C1_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_I2C1_RESET_ENABLE {0} \
CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {111.111115} \
CONFIG.PCW_I2C_RESET_ENABLE {1} \
CONFIG.PCW_I2C_RESET_SELECT {Share reset pin} \
CONFIG.PCW_IOPLL_CTRL_FBDIV {30} \
CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} \
CONFIG.PCW_IRQ_F2P_INTR {1} \
CONFIG.PCW_IRQ_F2P_MODE {DIRECT} \
CONFIG.PCW_MIO_0_DIRECTION {inout} \
CONFIG.PCW_MIO_0_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_0_PULLUP {enabled} \
CONFIG.PCW_MIO_0_SLEW {slow} \
CONFIG.PCW_MIO_10_DIRECTION {in} \
CONFIG.PCW_MIO_10_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_10_PULLUP {enabled} \
CONFIG.PCW_MIO_10_SLEW {slow} \
CONFIG.PCW_MIO_11_DIRECTION {out} \
CONFIG.PCW_MIO_11_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_11_PULLUP {enabled} \
CONFIG.PCW_MIO_11_SLEW {slow} \
CONFIG.PCW_MIO_12_DIRECTION {inout} \
CONFIG.PCW_MIO_12_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_12_PULLUP {enabled} \
CONFIG.PCW_MIO_12_SLEW {slow} \
CONFIG.PCW_MIO_13_DIRECTION {inout} \
CONFIG.PCW_MIO_13_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_13_PULLUP {enabled} \
CONFIG.PCW_MIO_13_SLEW {slow} \
CONFIG.PCW_MIO_14_DIRECTION {inout} \
CONFIG.PCW_MIO_14_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_14_PULLUP {enabled} \
CONFIG.PCW_MIO_14_SLEW {slow} \
CONFIG.PCW_MIO_15_DIRECTION {inout} \
CONFIG.PCW_MIO_15_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_15_PULLUP {enabled} \
CONFIG.PCW_MIO_15_SLEW {slow} \
CONFIG.PCW_MIO_16_DIRECTION {out} \
CONFIG.PCW_MIO_16_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_16_PULLUP {enabled} \
CONFIG.PCW_MIO_16_SLEW {fast} \
CONFIG.PCW_MIO_17_DIRECTION {out} \
CONFIG.PCW_MIO_17_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_17_PULLUP {enabled} \
CONFIG.PCW_MIO_17_SLEW {fast} \
CONFIG.PCW_MIO_18_DIRECTION {out} \
CONFIG.PCW_MIO_18_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_18_PULLUP {enabled} \
CONFIG.PCW_MIO_18_SLEW {fast} \
CONFIG.PCW_MIO_19_DIRECTION {out} \
CONFIG.PCW_MIO_19_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_19_PULLUP {enabled} \
CONFIG.PCW_MIO_19_SLEW {fast} \
CONFIG.PCW_MIO_1_DIRECTION {out} \
CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_1_PULLUP {enabled} \
CONFIG.PCW_MIO_1_SLEW {slow} \
CONFIG.PCW_MIO_20_DIRECTION {out} \
CONFIG.PCW_MIO_20_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_20_PULLUP {enabled} \
CONFIG.PCW_MIO_20_SLEW {fast} \
CONFIG.PCW_MIO_21_DIRECTION {out} \
CONFIG.PCW_MIO_21_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_21_PULLUP {enabled} \
CONFIG.PCW_MIO_21_SLEW {fast} \
CONFIG.PCW_MIO_22_DIRECTION {in} \
CONFIG.PCW_MIO_22_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_22_PULLUP {enabled} \
CONFIG.PCW_MIO_22_SLEW {fast} \
CONFIG.PCW_MIO_23_DIRECTION {in} \
CONFIG.PCW_MIO_23_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_23_PULLUP {enabled} \
CONFIG.PCW_MIO_23_SLEW {fast} \
CONFIG.PCW_MIO_24_DIRECTION {in} \
CONFIG.PCW_MIO_24_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_24_PULLUP {enabled} \
CONFIG.PCW_MIO_24_SLEW {fast} \
CONFIG.PCW_MIO_25_DIRECTION {in} \
CONFIG.PCW_MIO_25_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_25_PULLUP {enabled} \
CONFIG.PCW_MIO_25_SLEW {fast} \
CONFIG.PCW_MIO_26_DIRECTION {in} \
CONFIG.PCW_MIO_26_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_26_PULLUP {enabled} \
CONFIG.PCW_MIO_26_SLEW {fast} \
CONFIG.PCW_MIO_27_DIRECTION {in} \
CONFIG.PCW_MIO_27_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_27_PULLUP {enabled} \
CONFIG.PCW_MIO_27_SLEW {fast} \
CONFIG.PCW_MIO_28_DIRECTION {inout} \
CONFIG.PCW_MIO_28_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_28_PULLUP {enabled} \
CONFIG.PCW_MIO_28_SLEW {fast} \
CONFIG.PCW_MIO_29_DIRECTION {in} \
CONFIG.PCW_MIO_29_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_29_PULLUP {enabled} \
CONFIG.PCW_MIO_29_SLEW {fast} \
CONFIG.PCW_MIO_2_DIRECTION {inout} \
CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_2_PULLUP {disabled} \
CONFIG.PCW_MIO_2_SLEW {slow} \
CONFIG.PCW_MIO_30_DIRECTION {out} \
CONFIG.PCW_MIO_30_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_30_PULLUP {enabled} \
CONFIG.PCW_MIO_30_SLEW {fast} \
CONFIG.PCW_MIO_31_DIRECTION {in} \
CONFIG.PCW_MIO_31_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_31_PULLUP {enabled} \
CONFIG.PCW_MIO_31_SLEW {fast} \
CONFIG.PCW_MIO_32_DIRECTION {inout} \
CONFIG.PCW_MIO_32_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_32_PULLUP {enabled} \
CONFIG.PCW_MIO_32_SLEW {fast} \
CONFIG.PCW_MIO_33_DIRECTION {inout} \
CONFIG.PCW_MIO_33_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_33_PULLUP {enabled} \
CONFIG.PCW_MIO_33_SLEW {fast} \
CONFIG.PCW_MIO_34_DIRECTION {inout} \
CONFIG.PCW_MIO_34_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_34_PULLUP {enabled} \
CONFIG.PCW_MIO_34_SLEW {fast} \
CONFIG.PCW_MIO_35_DIRECTION {inout} \
CONFIG.PCW_MIO_35_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_35_PULLUP {enabled} \
CONFIG.PCW_MIO_35_SLEW {fast} \
CONFIG.PCW_MIO_36_DIRECTION {in} \
CONFIG.PCW_MIO_36_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_36_PULLUP {enabled} \
CONFIG.PCW_MIO_36_SLEW {fast} \
CONFIG.PCW_MIO_37_DIRECTION {inout} \
CONFIG.PCW_MIO_37_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_37_PULLUP {enabled} \
CONFIG.PCW_MIO_37_SLEW {fast} \
CONFIG.PCW_MIO_38_DIRECTION {inout} \
CONFIG.PCW_MIO_38_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_38_PULLUP {enabled} \
CONFIG.PCW_MIO_38_SLEW {fast} \
CONFIG.PCW_MIO_39_DIRECTION {inout} \
CONFIG.PCW_MIO_39_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_39_PULLUP {enabled} \
CONFIG.PCW_MIO_39_SLEW {fast} \
CONFIG.PCW_MIO_3_DIRECTION {inout} \
CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_3_PULLUP {disabled} \
CONFIG.PCW_MIO_3_SLEW {slow} \
CONFIG.PCW_MIO_40_DIRECTION {inout} \
CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_40_PULLUP {enabled} \
CONFIG.PCW_MIO_40_SLEW {slow} \
CONFIG.PCW_MIO_41_DIRECTION {inout} \
CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_41_PULLUP {enabled} \
CONFIG.PCW_MIO_41_SLEW {slow} \
CONFIG.PCW_MIO_42_DIRECTION {inout} \
CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_42_PULLUP {enabled} \
CONFIG.PCW_MIO_42_SLEW {slow} \
CONFIG.PCW_MIO_43_DIRECTION {inout} \
CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_43_PULLUP {enabled} \
CONFIG.PCW_MIO_43_SLEW {slow} \
CONFIG.PCW_MIO_44_DIRECTION {inout} \
CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_44_PULLUP {enabled} \
CONFIG.PCW_MIO_44_SLEW {slow} \
CONFIG.PCW_MIO_45_DIRECTION {inout} \
CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_45_PULLUP {enabled} \
CONFIG.PCW_MIO_45_SLEW {slow} \
CONFIG.PCW_MIO_46_DIRECTION {out} \
CONFIG.PCW_MIO_46_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_46_PULLUP {enabled} \
CONFIG.PCW_MIO_46_SLEW {slow} \
CONFIG.PCW_MIO_47_DIRECTION {in} \
CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_47_PULLUP {enabled} \
CONFIG.PCW_MIO_47_SLEW {slow} \
CONFIG.PCW_MIO_48_DIRECTION {out} \
CONFIG.PCW_MIO_48_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_48_PULLUP {enabled} \
CONFIG.PCW_MIO_48_SLEW {slow} \
CONFIG.PCW_MIO_49_DIRECTION {in} \
CONFIG.PCW_MIO_49_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_49_PULLUP {enabled} \
CONFIG.PCW_MIO_49_SLEW {slow} \
CONFIG.PCW_MIO_4_DIRECTION {inout} \
CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_4_PULLUP {disabled} \
CONFIG.PCW_MIO_4_SLEW {slow} \
CONFIG.PCW_MIO_50_DIRECTION {inout} \
CONFIG.PCW_MIO_50_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_50_PULLUP {enabled} \
CONFIG.PCW_MIO_50_SLEW {slow} \
CONFIG.PCW_MIO_51_DIRECTION {inout} \
CONFIG.PCW_MIO_51_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_51_PULLUP {enabled} \
CONFIG.PCW_MIO_51_SLEW {slow} \
CONFIG.PCW_MIO_52_DIRECTION {out} \
CONFIG.PCW_MIO_52_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_52_PULLUP {enabled} \
CONFIG.PCW_MIO_52_SLEW {slow} \
CONFIG.PCW_MIO_53_DIRECTION {inout} \
CONFIG.PCW_MIO_53_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_53_PULLUP {enabled} \
CONFIG.PCW_MIO_53_SLEW {slow} \
CONFIG.PCW_MIO_5_DIRECTION {inout} \
CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_5_PULLUP {disabled} \
CONFIG.PCW_MIO_5_SLEW {slow} \
CONFIG.PCW_MIO_6_DIRECTION {out} \
CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_6_PULLUP {disabled} \
CONFIG.PCW_MIO_6_SLEW {slow} \
CONFIG.PCW_MIO_7_DIRECTION {out} \
CONFIG.PCW_MIO_7_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_7_PULLUP {disabled} \
CONFIG.PCW_MIO_7_SLEW {slow} \
CONFIG.PCW_MIO_8_DIRECTION {out} \
CONFIG.PCW_MIO_8_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_8_PULLUP {disabled} \
CONFIG.PCW_MIO_8_SLEW {slow} \
CONFIG.PCW_MIO_9_DIRECTION {inout} \
CONFIG.PCW_MIO_9_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_9_PULLUP {enabled} \
CONFIG.PCW_MIO_9_SLEW {slow} \
CONFIG.PCW_MIO_TREE_PERIPHERALS {GPIO#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#GPIO#Quad SPI Flash#GPIO#UART 0#UART 0#I2C 1#I2C 1#I2C 0#I2C 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#USB Reset#SD 0#UART 1#UART 1#GPIO#GPIO#Enet 0#Enet 0} \
CONFIG.PCW_MIO_TREE_SIGNALS {gpio[0]#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]/HOLD_B#qspi0_sclk#gpio[7]#qspi_fbclk#gpio[9]#rx#tx#scl#sda#scl#sda#tx_clk#txd[0]#txd[1]#txd[2]#txd[3]#tx_ctl#rx_clk#rxd[0]#rxd[1]#rxd[2]#rxd[3]#rx_ctl#data[4]#dir#stp#nxt#data[0]#data[1]#data[2]#data[3]#clk#data[5]#data[6]#data[7]#clk#cmd#data[0]#data[1]#data[2]#data[3]#reset#cd#tx#rx#gpio[50]#gpio[51]#mdc#mdio} \
CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_OVERRIDE_BASIC_CLOCK {0} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY0 {0.221} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY1 {0.222} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY2 {0.217} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY3 {0.244} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0 {-0.050} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1 {-0.044} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2 {-0.035} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3 {-0.100} \
CONFIG.PCW_PCAP_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_PCAP_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_PLL_BYPASSMODE_ENABLE {0} \
CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 3.3V} \
CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {1} \
CONFIG.PCW_QSPI_GRP_FBCLK_IO {MIO 8} \
CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
CONFIG.PCW_QSPI_INTERNAL_HIGHADDRESS {0xFCFFFFFF} \
CONFIG.PCW_QSPI_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
CONFIG.PCW_SD0_GRP_CD_ENABLE {1} \
CONFIG.PCW_SD0_GRP_CD_IO {MIO 47} \
CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
CONFIG.PCW_SD0_GRP_WP_ENABLE {1} \
CONFIG.PCW_SD0_GRP_WP_IO {EMIO} \
CONFIG.PCW_SD0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_SD0_SD0_IO {MIO 40 .. 45} \
CONFIG.PCW_SDIO_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {20} \
CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
CONFIG.PCW_SINGLE_QSPI_DATA_MODE {x4} \
CONFIG.PCW_SMC_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_SMC_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_SPI0_GRP_SS0_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS0_IO {<Select>} \
CONFIG.PCW_SPI0_GRP_SS1_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS1_IO {<Select>} \
CONFIG.PCW_SPI0_GRP_SS2_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS2_IO {<Select>} \
CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_SPI0_SPI0_IO {<Select>} \
CONFIG.PCW_SPI1_GRP_SS0_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS0_IO {<Select>} \
CONFIG.PCW_SPI1_GRP_SS1_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS1_IO {<Select>} \
CONFIG.PCW_SPI1_GRP_SS2_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS2_IO {<Select>} \
CONFIG.PCW_SPI1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_SPI1_SPI1_IO {<Select>} \
CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_SPI_PERIPHERAL_FREQMHZ {166.666666} \
CONFIG.PCW_SPI_PERIPHERAL_VALID {0} \
CONFIG.PCW_TPIU_PERIPHERAL_CLKSRC {External} \
CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TPIU_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_TTC0_TTC0_IO {EMIO} \
CONFIG.PCW_TTC_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_UART0_GRP_FULL_ENABLE {0} \
CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_UART0_UART0_IO {MIO 10 .. 11} \
CONFIG.PCW_UART1_BAUD_RATE {115200} \
CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
CONFIG.PCW_UART1_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_UART1_UART1_IO {MIO 48 .. 49} \
CONFIG.PCW_UART_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {10} \
CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {533.333374} \
CONFIG.PCW_UIPARAM_DDR_ADV_ENABLE {0} \
CONFIG.PCW_UIPARAM_DDR_AL {0} \
CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
CONFIG.PCW_UIPARAM_DDR_BL {8} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY0 {0.221} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY1 {0.222} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY2 {0.217} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY3 {0.244} \
CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {32 Bit} \
CONFIG.PCW_UIPARAM_DDR_CL {7} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM {18.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM {18.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM {18.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM {18.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_STOP_EN {0} \
CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
CONFIG.PCW_UIPARAM_DDR_CWL {6} \
CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_LENGTH_MM {22.8} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH {105.056} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_LENGTH_MM {27.9} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH {66.904} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_LENGTH_MM {22.9} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH {89.1715} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_LENGTH_MM {29.4} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH {113.63} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 {-0.050} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 {-0.044} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 {-0.035} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 {-0.100} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_LENGTH_MM {22.8} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH {98.503} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_LENGTH_MM {27.9} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH {68.5855} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_LENGTH_MM {22.9} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH {90.295} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_LENGTH_MM {29.4} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH {103.977} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
CONFIG.PCW_UIPARAM_DDR_ENABLE {1} \
CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {533.333333} \
CONFIG.PCW_UIPARAM_DDR_HIGH_TEMP {Normal (0-85)} \
CONFIG.PCW_UIPARAM_DDR_MEMORY_TYPE {DDR 3 (Low Voltage)} \
CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41K256M16 RE-125} \
CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_DATA_EYE {1} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_READ_GATE {1} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL {1} \
CONFIG.PCW_UIPARAM_DDR_T_FAW {40.0} \
CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {35.0} \
CONFIG.PCW_UIPARAM_DDR_T_RC {48.75} \
CONFIG.PCW_UIPARAM_DDR_T_RCD {7} \
CONFIG.PCW_UIPARAM_DDR_T_RP {7} \
CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {0} \
CONFIG.PCW_USB0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_USB0_PERIPHERAL_FREQMHZ {60} \
CONFIG.PCW_USB0_RESET_ENABLE {1} \
CONFIG.PCW_USB0_RESET_IO {MIO 46} \
CONFIG.PCW_USB0_USB0_IO {MIO 28 .. 39} \
CONFIG.PCW_USB1_RESET_ENABLE {0} \
CONFIG.PCW_USB_RESET_ENABLE {1} \
CONFIG.PCW_USB_RESET_POLARITY {Active Low} \
CONFIG.PCW_USB_RESET_SELECT {Share reset pin} \
CONFIG.PCW_USE_AXI_NONSECURE {0} \
CONFIG.PCW_USE_CROSS_TRIGGER {0} \
CONFIG.PCW_USE_DEFAULT_ACP_USER_VAL {1} \
CONFIG.PCW_USE_FABRIC_INTERRUPT {1} \
CONFIG.PCW_USE_M_AXI_GP0 {1} \
CONFIG.PCW_USE_S_AXI_ACP {0} \
CONFIG.PCW_USE_S_AXI_GP0 {0} \
CONFIG.PCW_USE_S_AXI_HP0 {1} \
] $processing_system7_0
# Create instance: rst_ps7_0_100M, and set properties
set rst_ps7_0_100M [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 rst_ps7_0_100M ]
# Create instance: xlconcat_0, and set properties
set xlconcat_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 xlconcat_0 ]
set_property -dict [ list \
CONFIG.NUM_PORTS {1} \
] $xlconcat_0
# Create instance: xlconstant_0, and set properties
set xlconstant_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 xlconstant_0 ]
# Create interface connections
connect_bd_intf_net -intf_net S_AXI_ACP_1 [get_bd_intf_pins S_AXI_HP0] [get_bd_intf_pins processing_system7_0/S_AXI_HP0]
connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_pins DDR] [get_bd_intf_pins processing_system7_0/DDR]
connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_pins FIXED_IO] [get_bd_intf_pins processing_system7_0/FIXED_IO]
connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins M_AXI_GP0] [get_bd_intf_pins processing_system7_0/M_AXI_GP0]
# Create port connections
connect_bd_net -net In0_1 [get_bd_pins In0] [get_bd_pins xlconcat_0/In0]
connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins FCLK_CLK0] [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP0_ACLK] [get_bd_pins rst_ps7_0_100M/slowest_sync_clk]
connect_bd_net -net processing_system7_0_FCLK_CLK3 [get_bd_pins FCLK_CLK3] [get_bd_pins processing_system7_0/FCLK_CLK3]
connect_bd_net -net processing_system7_0_FCLK_RESET0_N [get_bd_pins processing_system7_0/FCLK_RESET0_N] [get_bd_pins rst_ps7_0_100M/ext_reset_in]
connect_bd_net -net rst_ps7_0_100M_peripheral_aresetn [get_bd_pins peripheral_aresetn] [get_bd_pins rst_ps7_0_100M/peripheral_aresetn]
connect_bd_net -net xlconcat_0_dout [get_bd_pins processing_system7_0/IRQ_F2P] [get_bd_pins xlconcat_0/dout]
connect_bd_net -net xlconstant_0_dout [get_bd_pins processing_system7_0/SDIO0_WP] [get_bd_pins xlconstant_0/dout]
# Restore current instance
current_bd_instance $oldCurInst
}
# Hierarchical cell: AXI_Intercon
proc create_hier_cell_AXI_Intercon { parentCell nameHier } {
variable script_folder
if { $parentCell eq "" || $nameHier eq "" } {
catch {common::send_msg_id "BD_TCL-102" "ERROR" "create_hier_cell_AXI_Intercon() - Empty argument(s)!"}
return
}
# Get object for parentCell
set parentObj [get_bd_cells $parentCell]
if { $parentObj == "" } {
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
return
}
# Make sure parentObj is hier blk
set parentType [get_property TYPE $parentObj]
if { $parentType ne "hier" } {
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
return
}
# Save current instance; Restore later
set oldCurInst [current_bd_instance .]
# Set parent object as current
current_bd_instance $parentObj
# Create cell and set as current instance
set hier_obj [create_bd_cell -type hier $nameHier]
current_bd_instance $hier_obj
# Create interface pins
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M00_AXI
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M00_AXI1
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S00_AXI
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S00_AXI1
# Create pins
create_bd_pin -dir I -type clk ACLK
create_bd_pin -dir I -type rst S00_ARESETN
# Create instance: axi_mem_intercon, and set properties
set axi_mem_intercon [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_mem_intercon ]
set_property -dict [ list \
CONFIG.NUM_MI {1} \
] $axi_mem_intercon
# Create instance: ps7_0_axi_periph, and set properties
set ps7_0_axi_periph [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 ps7_0_axi_periph ]
set_property -dict [ list \
CONFIG.NUM_MI {1} \
] $ps7_0_axi_periph
# Create interface connections
connect_bd_intf_net -intf_net axi_mem_intercon_M00_AXI [get_bd_intf_pins M00_AXI1] [get_bd_intf_pins axi_mem_intercon/M00_AXI]
connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins S00_AXI] [get_bd_intf_pins ps7_0_axi_periph/S00_AXI]
connect_bd_intf_net -intf_net ps7_0_axi_periph_M00_AXI [get_bd_intf_pins M00_AXI] [get_bd_intf_pins ps7_0_axi_periph/M00_AXI]
connect_bd_intf_net -intf_net zynq_base_hdmi_0_M_AXI [get_bd_intf_pins S00_AXI1] [get_bd_intf_pins axi_mem_intercon/S00_AXI]
# Create port connections
connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins ACLK] [get_bd_pins axi_mem_intercon/ACLK] [get_bd_pins axi_mem_intercon/M00_ACLK] [get_bd_pins axi_mem_intercon/S00_ACLK] [get_bd_pins ps7_0_axi_periph/ACLK] [get_bd_pins ps7_0_axi_periph/M00_ACLK] [get_bd_pins ps7_0_axi_periph/S00_ACLK]
connect_bd_net -net rst_ps7_0_100M_peripheral_aresetn [get_bd_pins S00_ARESETN] [get_bd_pins axi_mem_intercon/ARESETN] [get_bd_pins axi_mem_intercon/M00_ARESETN] [get_bd_pins axi_mem_intercon/S00_ARESETN] [get_bd_pins ps7_0_axi_periph/ARESETN] [get_bd_pins ps7_0_axi_periph/M00_ARESETN] [get_bd_pins ps7_0_axi_periph/S00_ARESETN]
# Restore current instance
current_bd_instance $oldCurInst
}
# Procedure to create entire design; Provide argument to make
# procedure reusable. If parentCell is "", will use root.
proc create_root_design { parentCell } {
variable script_folder
variable design_name
if { $parentCell eq "" } {
set parentCell [get_bd_cells /]
}
# Get object for parentCell
set parentObj [get_bd_cells $parentCell]
if { $parentObj == "" } {
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
return
}
# Make sure parentObj is hier blk
set parentType [get_property TYPE $parentObj]
if { $parentType ne "hier" } {
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
return
}
# Save current instance; Restore later
set oldCurInst [current_bd_instance .]
# Set parent object as current
current_bd_instance $parentObj
# Create interface ports
set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]
# Create ports
set BUTTON [ create_bd_port -dir I -from 3 -to 0 BUTTON ]
set HDMI_CLK_N [ create_bd_port -dir O HDMI_CLK_N ]
set HDMI_CLK_P [ create_bd_port -dir O HDMI_CLK_P ]
set HDMI_DATA_N [ create_bd_port -dir O -from 2 -to 0 HDMI_DATA_N ]
set HDMI_DATA_P [ create_bd_port -dir O -from 2 -to 0 HDMI_DATA_P ]
set LED [ create_bd_port -dir O -from 3 -to 0 LED ]
set RGB_LED [ create_bd_port -dir O -from 5 -to 0 RGB_LED ]
set SWITCH [ create_bd_port -dir I -from 3 -to 0 SWITCH ]
# Create instance: AXI_Intercon
create_hier_cell_AXI_Intercon [current_bd_instance .] AXI_Intercon
# Create instance: PS
create_hier_cell_PS [current_bd_instance .] PS
# Create instance: ZYNQ_BASE
create_hier_cell_ZYNQ_BASE [current_bd_instance .] ZYNQ_BASE
# Create interface connections
connect_bd_intf_net -intf_net axi_mem_intercon_M00_AXI [get_bd_intf_pins AXI_Intercon/M00_AXI1] [get_bd_intf_pins PS/S_AXI_HP0]
connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins PS/DDR]
connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_ports FIXED_IO] [get_bd_intf_pins PS/FIXED_IO]
connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins AXI_Intercon/S00_AXI] [get_bd_intf_pins PS/M_AXI_GP0]
connect_bd_intf_net -intf_net ps7_0_axi_periph_M00_AXI [get_bd_intf_pins AXI_Intercon/M00_AXI] [get_bd_intf_pins ZYNQ_BASE/S_AXIL]
connect_bd_intf_net -intf_net zynq_base_hdmi_0_M_AXI [get_bd_intf_pins AXI_Intercon/S00_AXI1] [get_bd_intf_pins ZYNQ_BASE/M_AXI]
# Create port connections
connect_bd_net -net BUTTON_0_1 [get_bd_ports BUTTON] [get_bd_pins ZYNQ_BASE/BUTTON_0]
connect_bd_net -net SWITCH_0_1 [get_bd_ports SWITCH] [get_bd_pins ZYNQ_BASE/SWITCH_0]
connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins AXI_Intercon/ACLK] [get_bd_pins PS/FCLK_CLK0] [get_bd_pins ZYNQ_BASE/M_AXI_ACLK]
connect_bd_net -net processing_system7_0_FCLK_CLK3 [get_bd_pins PS/FCLK_CLK3] [get_bd_pins ZYNQ_BASE/VIDEO_CLK]
connect_bd_net -net rst_ps7_0_100M_peripheral_aresetn [get_bd_pins AXI_Intercon/S00_ARESETN] [get_bd_pins PS/peripheral_aresetn] [get_bd_pins ZYNQ_BASE/M_AXI_ARESETN]
connect_bd_net -net zynq_base_hdmi_0_HDMI_CLK_N [get_bd_ports HDMI_CLK_N] [get_bd_pins ZYNQ_BASE/HDMI_CLK_N_0]
connect_bd_net -net zynq_base_hdmi_0_HDMI_CLK_P [get_bd_ports HDMI_CLK_P] [get_bd_pins ZYNQ_BASE/HDMI_CLK_P_0]
connect_bd_net -net zynq_base_hdmi_0_HDMI_DATA_N [get_bd_ports HDMI_DATA_N] [get_bd_pins ZYNQ_BASE/HDMI_DATA_N_0]
connect_bd_net -net zynq_base_hdmi_0_HDMI_DATA_P [get_bd_ports HDMI_DATA_P] [get_bd_pins ZYNQ_BASE/HDMI_DATA_P_0]
connect_bd_net -net zynq_base_hdmi_0_LED [get_bd_ports LED] [get_bd_pins ZYNQ_BASE/LED_0]
connect_bd_net -net zynq_base_hdmi_0_RGB_LED [get_bd_ports RGB_LED] [get_bd_pins ZYNQ_BASE/RGB_LED_0]
connect_bd_net -net zynq_base_hdmi_0_VIDEO_INTERRUPT [get_bd_pins PS/In0] [get_bd_pins ZYNQ_BASE/VIDEO_INTERRUPT]
# Create address segments
assign_bd_address -offset 0x43C00000 -range 0x00010000 -target_address_space [get_bd_addr_spaces PS/processing_system7_0/Data] [get_bd_addr_segs ZYNQ_BASE/zynq_base_hdmi_0/S_AXIL/reg0] -force
assign_bd_address -offset 0x00000000 -range 0x40000000 -target_address_space [get_bd_addr_spaces ZYNQ_BASE/zynq_base_hdmi_0/M_AXI] [get_bd_addr_segs PS/processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] -force
# Restore current instance
current_bd_instance $oldCurInst
validate_bd_design
save_bd_design
}
# End of create_root_design()
##################################################################
# MAIN FLOW
##################################################################
create_root_design ""
Reference in New Issue View Git Blame Copy Permalink